|
SIPPIN ENERGY PRODUCTS
is a Connecticut dealer only.
If you are looking for information about Bock
water heaters outside this area, you can contact Bock at the address and phone number
listed at the bottom of this page.
You
can visit the Official Bock Web Site Here...
Bock Oil Fired Hot Water Heaters
 
Conventional and LO-BOY Models are available
to accommodate virtually any installation needs.
For homeowners with warm air furnaces, Bock
oil fired hot water heaters provide the very best in hot water output. Quality
construction means long life, and easy maintenance. We have installed Bock water heaters
for over 20 years and can confidently say they are the very best. Bock water heaters are
available in a variety of configurations including low profile models to accommodate tight
installation sites (like crawl spaces). They are available in a variety of sizes including
30 gallon, and 50 gallon models. Don't get confused on the size issue here...If you have
an 80 gallon electric heater, a Bock 30 gallon unit will outperform it, and for a whole
lot less money! (about 5 times less!)
Roughing-In Dimensions
and General Specifications
Model |
A |
B |
C |
Cold Inlet |
Hot Outlet |
Drain |
Relief Valve |
Storage Capacity |
BTUH Input |
Maximum Firing Rate |
Recovery At 100º Rise |
Shipping Weight |
| 32E* |
51" |
20" |
6" |
¾" |
¾" |
¾"
|
¾" |
32
gals. |
104,000 |
.75
GPH |
102
GPH |
279
LBS. |
| 30ES |
37" |
24" |
6" |
1" |
1" |
¾" |
¾" |
28
gals. |
84,000 |
.60
GPH |
88
GPH |
289
LBS. |
| 50ES |
52" |
26" |
6" |
1" |
1
½" |
¾" |
¾" |
50
gals. |
140,000 |
1.0
GPH |
139
GPH |
394
LBS. |
| 51E |
59" |
24" |
6" |
1" |
1" |
¾" |
¾" |
50
gals. |
152,000 |
1.10
GPH |
138
GPH |
364
LBS. |
| 71E |
66" |
26" |
6" |
1" |
1
½" |
¾"** |
¾" |
70
gals. |
173,000 |
1.25
GPH |
157
GPH |
494
LBS. |
*Available with foam insulation as 32PP. **Optional 1
½" inlet with bushing and drain valve installed. Pressures, all: Test
pressure, 300 PSI; Working pressure, 150 PSI. Standard voltage, all: 120V, 60HZ,
1P. Other voltages available.
Extra tapping for T&P valve; nipples supplied
for top connection – all.
Warranty, all: Tank, 5-year (limited). See
Certificate of Warranty. MEET ASHRAE STANDARD 90A. Warning: Do not install on
combustible flooring. Installation should be in accordance with all local codes and NFPA
31: "Installation of Oil Burning Equipment." Caution. The recommended
water temperature water temperature setting for normal residential use is 120º F.
If you are outside of the Southwestern Connecticut area, and you are
looking for a Bock Dealer in your area,
you can contact Bock at:
Bock Water Heaters, Inc.
P.O. Box 8632 • 110 South Dickenson Street
Madison, Wisconsin, 53708-8632
Phone 608-257-2225
Send mail to kochiss@sippin.com with
questions or comments about this web site.
Copyright © 1998 Sippin Energy Products Co.
Last modified:
June 12, 2007
|